Taking too long? Close loading screen.

Since we thought how the obstacles that the robot would pass, we had have been started to work them. The four obstacles are different and each characterizes the difficulty that is displayed for the robot. The obstacles are made of wood by laser cut, where then the parts are joined to each other. 

Tha tails with whom we are going to test and experimentation our robot are these two. They are 3D printed with TPU material.The white tail have 60% infill and black tail have 90% infill. The old tail is thinner and have one 

Lorem Ipsum is simply dummy text of the printing and typesetting industry. Lorem Ipsum has been the industrys standard dummy text ever since the 1500s, when an unknown printer took a galley of type and scrambled it to make a type specimen book.

Lorem Ipsum is simply dummy text of the printing and typesetting industry. Lorem Ipsum has been the industrys standard dummy text ever since the 1500s, when an unknown printer took a galley of type and scrambled it to make a type specimen book.

Lorem Ipsum is simply dummy text of the printing and typesetting industry. Lorem Ipsum has been the industrys standard dummy text ever since the 1500s, when an unknown printer took a galley of type and scrambled it to make a type specimen book.

About

This website is about the Bio Robot Car project that is happening in BONEVET Makerspace.

Find us at

Str. Vëllezerit Frashëri
Gjakovë 50000
Kosova

Contact

+386 49 187 800
info@bonevet.org